TireSizesFinder

255/55R20 vs 285/40R22

285/40R22 is 0.07 in (1.7 mm) shorter than 255/55R20, a −0.22% diameter difference. With the speedometer set for 255/55R20, an indicated 60 mph is 59.9 mph on 285/40R22.

Is this a safe swap?

Diameter difference −0.22%: under 1%

By overall diameter alone, 285/40R22 is a near match for 255/55R20; the speedometer changes by less than 1%. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

To-scale drawing: 255/55R20 (31.04 in) vs 285/40R22 (30.98 in)255/55R2031.04 in × 10.04 in285/40R2230.98 in × 11.22 in
Side profile and tread width, drawn to the same scale.
255/55R20 vs 285/40R22 differences
Measurement255/55R20285/40R22Difference% diff
Overall diameter31.04 in (788.5 mm)30.98 in (786.8 mm)−0.07 in (−1.7 mm)−0.22%
Sidewall height5.52 in (140.3 mm)4.49 in (114.0 mm)−1.03 in (−26.2 mm)−18.72%
Section width10.04 in (255.0 mm)11.22 in (285.0 mm)+1.18 in (+30.0 mm)+11.76%
Circumference97.53 in (2,477.1 mm)97.32 in (2,471.8 mm)−0.21 in (−5.3 mm)−0.22%
Revolutions per mile650651+1+0.22%
True speed with the speedometer calibrated for 255/55R20
IndicatedActual on 255/55R20Actual on 285/40R22Difference
30 mph30.0 mph29.9 mph−0.1 mph
60 mph60.0 mph59.9 mph−0.1 mph
75 mph75.0 mph74.8 mph−0.2 mph

Ride-height change: 285/40R22 lowers the vehicle by 0.03 in (0.9 mm) at the axle (half the −1.7 mm diameter difference).

285/40R22 is 0.07 in shorter than 255/55R20 and 30 mm wider, a 0.22% difference in overall diameter.

With the speedometer calibrated for 255/55R20, an indicated 60 mph is actually 59.9 mph on 285/40R22, and revolutions per mile change from 650 to 651.

285/40R22 mounts on a 22-inch wheel, a plus-2 fitment from the 20-inch wheel of 255/55R20.

Size pages

Other comparisons with 255/55R20

Other comparisons with 285/40R22

Source: Calculated from standard tire geometry formulas. Verified . How these numbers are calculated.