285/45R20 vs 285/50R20

285/50R20 is 1.12 in (28.5 mm) taller than 285/45R20, a +3.73% diameter difference. With the speedometer set for 285/45R20, an indicated 60 mph is 62.2 mph on 285/50R20.

Is this a safe swap?

Diameter difference +3.73%: outside the ±3% guideline

By overall diameter alone, 285/50R20 falls outside the ±3% range commonly used as a guideline when replacing 285/45R20; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

285/45R20 vs 285/50R20 differences
Measurement	285/45R20	285/50R20	Difference	% diff
Overall diameter	30.10 in (764.5 mm)	31.22 in (793.0 mm)	+1.12 in (+28.5 mm)	+3.73%
Sidewall height	5.05 in (128.3 mm)	5.61 in (142.5 mm)	+0.56 in (+14.3 mm)	+11.11%
Section width	11.22 in (285.0 mm)	11.22 in (285.0 mm)	0.00 in (0.0 mm)	0.00%
Circumference	94.56 in (2,401.7 mm)	98.08 in (2,491.3 mm)	+3.53 in (+89.5 mm)	+3.73%
Revolutions per mile	670	646	−24	−3.59%

True speed with the speedometer calibrated for 285/45R20
Indicated	Actual on 285/45R20	Actual on 285/50R20	Difference
30 mph	30.0 mph	31.1 mph	+1.1 mph
60 mph	60.0 mph	62.2 mph	+2.2 mph
75 mph	75.0 mph	77.8 mph	+2.8 mph

Ride-height change: 285/50R20 raises the vehicle by 0.56 in (14.3 mm) at the axle (half the +28.5 mm diameter difference).

285/50R20 is 1.12 in taller than 285/45R20 and the same width, a 3.73% difference in overall diameter.

With the speedometer calibrated for 285/45R20, an indicated 60 mph is actually 62.2 mph on 285/50R20, and revolutions per mile change from 670 to 646.

Both sizes mount on 20-inch wheels.

Size pages

Other comparisons with 285/45R20

Other comparisons with 285/50R20

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.