285/70R18 vs 325/60R20

325/60R20 is 1.65 in (41.8 mm) taller than 285/70R18, a +4.88% diameter difference. With the speedometer set for 285/70R18, an indicated 60 mph is 62.9 mph on 325/60R20.

Is this a safe swap?

Diameter difference +4.88%: outside the ±3% guideline

By overall diameter alone, 325/60R20 falls outside the ±3% range commonly used as a guideline when replacing 285/70R18; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

285/70R18 vs 325/60R20 differences
Measurement	285/70R18	325/60R20	Difference	% diff
Overall diameter	33.71 in (856.2 mm)	35.35 in (898.0 mm)	+1.65 in (+41.8 mm)	+4.88%
Sidewall height	7.85 in (199.5 mm)	7.68 in (195.0 mm)	−0.18 in (−4.5 mm)	−2.26%
Section width	11.22 in (285.0 mm)	12.80 in (325.0 mm)	+1.57 in (+40.0 mm)	+14.04%
Circumference	105.90 in (2,689.8 mm)	111.07 in (2,821.2 mm)	+5.17 in (+131.3 mm)	+4.88%
Revolutions per mile	598	570	−28	−4.65%

True speed with the speedometer calibrated for 285/70R18
Indicated	Actual on 285/70R18	Actual on 325/60R20	Difference
30 mph	30.0 mph	31.5 mph	+1.5 mph
60 mph	60.0 mph	62.9 mph	+2.9 mph
75 mph	75.0 mph	78.7 mph	+3.7 mph

Ride-height change: 325/60R20 raises the vehicle by 0.82 in (20.9 mm) at the axle (half the +41.8 mm diameter difference).

325/60R20 is 1.65 in taller than 285/70R18 and 40 mm wider, a 4.88% difference in overall diameter.

With the speedometer calibrated for 285/70R18, an indicated 60 mph is actually 62.9 mph on 325/60R20, and revolutions per mile change from 598 to 570.

325/60R20 mounts on a 20-inch wheel, a plus-2 fitment from the 18-inch wheel of 285/70R18.

Size pages

Other comparisons with 285/70R18

Other comparisons with 325/60R20

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.