295/60R20 vs 35x12.50R20

35x12.50R20 is 1.06 in (27.0 mm) taller than 295/60R20, a +3.13% diameter difference. With the speedometer set for 295/60R20, an indicated 60 mph is 61.9 mph on 35x12.50R20.

Is this a safe swap?

Diameter difference +3.13%: outside the ±3% guideline

By overall diameter alone, 35x12.50R20 falls outside the ±3% range commonly used as a guideline when replacing 295/60R20; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

295/60R20 vs 35x12.50R20 differences
Measurement	295/60R20	35x12.50R20	Difference	% diff
Overall diameter	33.94 in (862.0 mm)	35.00 in (889.0 mm)	+1.06 in (+27.0 mm)	+3.13%
Sidewall height	6.97 in (177.0 mm)	7.50 in (190.5 mm)	+0.53 in (+13.5 mm)	+7.63%
Section width	11.61 in (295.0 mm)	12.50 in (317.5 mm)	+0.89 in (+22.5 mm)	+7.63%
Circumference	106.62 in (2,708.1 mm)	109.96 in (2,792.9 mm)	+3.34 in (+84.8 mm)	+3.13%
Revolutions per mile	594	576	−18	−3.04%

True speed with the speedometer calibrated for 295/60R20
Indicated	Actual on 295/60R20	Actual on 35x12.50R20	Difference
30 mph	30.0 mph	30.9 mph	+0.9 mph
60 mph	60.0 mph	61.9 mph	+1.9 mph
75 mph	75.0 mph	77.3 mph	+2.3 mph

Ride-height change: 35x12.50R20 raises the vehicle by 0.53 in (13.5 mm) at the axle (half the +27.0 mm diameter difference).

35x12.50R20 is 1.06 in taller than 295/60R20 and 23 mm wider, a 3.13% difference in overall diameter.

With the speedometer calibrated for 295/60R20, an indicated 60 mph is actually 61.9 mph on 35x12.50R20, and revolutions per mile change from 594 to 576.

Both sizes mount on 20-inch wheels.

Size pages

Other comparisons with 295/60R20

Other comparisons with 35x12.50R20

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.