295/35R19 vs 295/40R19

295/40R19 is 1.16 in (29.5 mm) taller than 295/35R19, a +4.28% diameter difference. With the speedometer set for 295/35R19, an indicated 60 mph is 62.6 mph on 295/40R19.

Is this a safe swap?

Diameter difference +4.28%: outside the ±3% guideline

By overall diameter alone, 295/40R19 falls outside the ±3% range commonly used as a guideline when replacing 295/35R19; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

Side profile and tread width, drawn to the same scale.

295/35R19 vs 295/40R19 differences
Measurement	295/35R19	295/40R19	Difference	% diff
Overall diameter	27.13 in (689.1 mm)	28.29 in (718.6 mm)	+1.16 in (+29.5 mm)	+4.28%
Sidewall height	4.06 in (103.3 mm)	4.65 in (118.0 mm)	+0.58 in (+14.8 mm)	+14.29%
Section width	11.61 in (295.0 mm)	11.61 in (295.0 mm)	0.00 in (0.0 mm)	0.00%
Circumference	85.23 in (2,164.9 mm)	88.88 in (2,257.5 mm)	+3.65 in (+92.7 mm)	+4.28%
Revolutions per mile	743	713	−31	−4.11%

True speed with the speedometer calibrated for 295/35R19
Indicated	Actual on 295/35R19	Actual on 295/40R19	Difference
30 mph	30.0 mph	31.3 mph	+1.3 mph
60 mph	60.0 mph	62.6 mph	+2.6 mph
75 mph	75.0 mph	78.2 mph	+3.2 mph

Ride-height change: 295/40R19 raises the vehicle by 0.58 in (14.8 mm) at the axle (half the +29.5 mm diameter difference).

295/40R19 is 1.16 in taller than 295/35R19 and the same width, a 4.28% difference in overall diameter.

With the speedometer calibrated for 295/35R19, an indicated 60 mph is actually 62.6 mph on 295/40R19, and revolutions per mile change from 743 to 713.

Both sizes mount on 19-inch wheels.

Size pages

Other comparisons with 295/35R19

Other comparisons with 295/40R19

Source: Calculated from standard tire geometry formulas. Verified 2026-09-27. How these numbers are calculated.