35x12.50R15 vs 295/70R17

295/70R17 is 1.74 in (44.2 mm) shorter than 35x12.50R15, a −4.97% diameter difference. With the speedometer set for 35x12.50R15, an indicated 60 mph is 57.0 mph on 295/70R17.

Is this a safe swap?

Diameter difference −4.97%: outside the ±3% guideline

By overall diameter alone, 295/70R17 falls outside the ±3% range commonly used as a guideline when replacing 35x12.50R15; speedometer and ride-height changes are larger. This check uses diameter only. It does not assess load index, speed rating, wheel width or clearance.

To-scale drawing: 35x12.50R15 (35.00 in) vs 295/70R17 (33.26 in)35x12.50R1535.00 in × 12.50 in295/70R1733.26 in × 11.61 in
Side profile and tread width, drawn to the same scale.
35x12.50R15 vs 295/70R17 differences
Measurement35x12.50R15295/70R17Difference% diff
Overall diameter35.00 in (889.0 mm)33.26 in (844.8 mm)−1.74 in (−44.2 mm)−4.97%
Sidewall height10.00 in (254.0 mm)8.13 in (206.5 mm)−1.87 in (−47.5 mm)−18.70%
Section width12.50 in (317.5 mm)11.61 in (295.0 mm)−0.89 in (−22.5 mm)−7.09%
Circumference109.96 in (2,792.9 mm)104.49 in (2,654.0 mm)−5.47 in (−138.9 mm)−4.97%
Revolutions per mile576606+30+5.23%
True speed with the speedometer calibrated for 35x12.50R15
IndicatedActual on 35x12.50R15Actual on 295/70R17Difference
30 mph30.0 mph28.5 mph−1.5 mph
60 mph60.0 mph57.0 mph−3.0 mph
75 mph75.0 mph71.3 mph−3.7 mph

Ride-height change: 295/70R17 lowers the vehicle by 0.87 in (22.1 mm) at the axle (half the −44.2 mm diameter difference).

295/70R17 is 1.74 in shorter than 35x12.50R15 and 23 mm narrower, a 4.97% difference in overall diameter.

With the speedometer calibrated for 35x12.50R15, an indicated 60 mph is actually 57.0 mph on 295/70R17, and revolutions per mile change from 576 to 606.

295/70R17 mounts on a 17-inch wheel, a plus-2 fitment from the 15-inch wheel of 35x12.50R15.

Size pages

Other comparisons with 35x12.50R15

Other comparisons with 295/70R17

Source: Calculated from standard tire geometry formulas. Verified . How these numbers are calculated.